View Single Post
Old 10-19-2019, 01:49 PM   #3
Floats
Senior Member
 
Floats's Avatar
 
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 496
Default Re: Help! Tie rod end install

Chad,
Fit the ball first, before you start tightening the large retaining screw on the end.
The springs were probably worn as you say, however, so are the balls. Otherwise you would not have replaced them, would you ?
__________________
Regards
Chris
Cape Town
28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC
Floats is offline   Reply With Quote