The Ford Barn - View Single Post

al pa. · 10-04-2013, 07:22 PM

Not sure about this,but if there is a lip on the dash for the liner to attach to,see if the clips will slip over the dash lip,over the holes.The threaded side of the clip should be on the outer side of the lip,so that the screws can be started inside the liner. If threaded side of clip is positioned towards inner side of lip,it will just pull the clip apart,instead of snugging up to lip.

10-04-2013, 07:22 PM	#2
al pa. Senior Member Join Date: May 2010 Location: pgh.pa. Posts: 321	Re: glove compartment liner Not sure about this,but if there is a lip on the dash for the liner to attach to,see if the clips will slip over the dash lip,over the holes.The threaded side of the clip should be on the outer side of the lip,so that the screws can be started inside the liner. If threaded side of clip is positioned towards inner side of lip,it will just pull the clip apart,instead of snugging up to lip.