View Single Post
Old 07-12-2019, 11:31 AM   #10
Joe K
Senior Member
 
Joe K's Avatar
 
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,175
Default Re: steering hangs up in a tight turn.

Heh. IIRC, lLooking at front spindles they have a "cutout" where the front spindle hit the limiters. The cutout on mine are on both edges - as in the spindle could be used either left or right.

So it may not matter if limiters are placed to the front as the action will be the same.

(i.e thinking more on this it may screw up the orientation of the king-pin - a certain slope exists on the "ramp" of the retaining pin, the pin itself is cylindrical, and this ramp and a corresponding cut in the kingpin orients the top kingpin brake housing relative to the axle. Retaining pin reversed would change the relative orientation of the Kingpin?)

Rear would be factory, of course.


Joe K
__________________
Shudda kept the horse.
Joe K is offline   Reply With Quote