Re: FINALLY…T5 WITH Torque Tube in a ‘35-’40 Ford...The WHOLE STORY!
To Weemark
I'm very sure this will not fit into a 32 chassis without some major surgery to the K member itself.
Dick
As we discussed re the Cranium adapter, I'm very sure the Coupler available from GV would work very well with a minimum of machine work & EXPENSE.
Lastly, Dick, you've both done an admirable job of explaining how this was accomplished.
Had I been aware of this possibility, I may have gone this route rather than the 4 speed plus Gear Vendors Overdrive in my 32.
Well Done. Congrats!!
Jim
|