View Single Post
Old 09-12-2021, 04:23 PM   #9
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,530
Default Re: Let’s talk about V8 flathead head gasket

Quote:
Originally Posted by jimTN View Post
I use steel with copper coat and they work fine and if you wanted to use them over again they would work.


Copper composition gaskets can be reused as well. Simply use silver spray paint on each side
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH

Last edited by Ronnieroadster; 09-13-2021 at 01:37 PM.
Ronnieroadster is offline   Reply With Quote