I suggest you purchase the puller below which matchey your hub style (CHECK THE DIAGRAM IN THE CATALOG) . I had a stubborn one ant this tool did the trickjfor me. I took the info below from the Bratton's catalog. Good luck.
Supergnat
REAR WHEEL HUB PULLER
For Year(s): 28-31
Opening at base of puller hooks into the ring on the hub. One inch bolt at end of puller must be tighten down aginst axle end to loosen hub from axle. Made from strong ductile iron. A copy of an early after market puller.
Part #06150 REAR WHEEL HUB PULLER $ 31.00 REAR WHEEL HUB PULLER
For Year(s): 28-31
Opening at base of puller hooks into the groove on the hub. One inch bolt at end of puller must be tighten down aginst axle end to loosen hub from axle. Made from strong ductile iron. A copy of an early after market puller.
Part #06160 REAR WHEEL HUB PULLER $ 31.00