The Ford Barn - View Single Post

Byron Warwick · 01-17-2019, 01:54 PM

I don't have my truck at home.
The wood pieces in the cab do have the V-shaped holders for the bottom of the seat back. Also there is a metal strap that projects above the top of the seat back. I don't know if it attached to wood on the seat back or metal. It is about 3/4" wide and 2" above the back. One screw goes into the wood in the cab, and keeps it in place. The frame on my seat bottom is metal.
Hope this helps, Byron.

01-17-2019, 01:54 PM	#5
Byron Warwick Senior Member Join Date: May 2010 Location: Corunna, Ontario, Canada Posts: 309	Re: 1934 picku cab wood and seat I don't have my truck at home. The wood pieces in the cab do have the V-shaped holders for the bottom of the seat back. Also there is a metal strap that projects above the top of the seat back. I don't know if it attached to wood on the seat back or metal. It is about 3/4" wide and 2" above the back. One screw goes into the wood in the cab, and keeps it in place. The frame on my seat bottom is metal. Hope this helps, Byron. __________________ IT'S NOT YOUR AGE, IT'S YOUR ATTITUDE !