View Single Post
Old 09-14-2019, 08:19 PM   #7
Phil Gillespie
Senior Member
 
Phil Gillespie's Avatar
 
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
Default Re: 1946 Mercury/Ford Dash Light Switch Removal.

Quote:
Originally Posted by supereal View Post
Just take off the screws holding the dimmer and lift it up from the dash. These dimmers are a main cause of problems. Since the dash lights are not so bright as to cause problems, we just connect the two wires to the dimmer together and leave the dimmer in place.
So I removed dash light dimmer switch and that was my problem. Found the contact on rheostat not making.Adjusted and all good with lights now.
Many thanks for good direction and advice.
Phil NZ
Phil Gillespie is offline   Reply With Quote