The Ford Barn - View Single Post

JSeery · 09-24-2018, 08:12 AM

The quality of the rebuild is not the engines fault! This is not a common issue with flatheads (or any other engine for that matter). If the seats were not installed properly then they are going to have to be fixed. The only method I know of is to install the proper interference fit seats. Maybe some others have other suggestions.

09-24-2018, 08:12 AM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: loose exhaast seats The quality of the rebuild is not the engines fault! This is not a common issue with flatheads (or any other engine for that matter). If the seats were not installed properly then they are going to have to be fixed. The only method I know of is to install the proper interference fit seats. Maybe some others have other suggestions.