The Ford Barn - View Single Post

leon bee · 12-07-2019, 12:31 AM

Not lowered, Tinker, sits pretty dam high. I got the camber way closer than it was just using that camber eccentric up on the top arm. After I sacrificed a nice 1 1/4" open end, carving it with a grinder so it'd go in there.

12-07-2019, 12:31 AM	#16
leon bee Senior Member Join Date: May 2017 Location: Arkansas Posts: 611	Re: 50 Car Steering Idler Arm? Not lowered, Tinker, sits pretty dam high. I got the camber way closer than it was just using that camber eccentric up on the top arm. After I sacrificed a nice 1 1/4" open end, carving it with a grinder so it'd go in there.