The Ford Barn - View Single Post - Relieved stroker motor with Ford aluminum heads

Ol' Ron · 08-27-2021, 03:42 PM

I agree with B&S and Peter here A 284 ci engine with a 2GC carb on a bored Merc intake will feed the engine quite qwkk and a set of EAB heads will put the CR close to 9:1. Get a dist. from Charley NY and your troubles are over. These heads will work on an early block, just plug the right holes. But a late block is worth the effort.
Gramps

08-27-2021, 03:42 PM	#8
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,857	Re: Relieved stroker motor with Ford aluminum heads I agree with B&S and Peter here A 284 ci engine with a 2GC carb on a bored Merc intake will feed the engine quite qwkk and a set of EAB heads will put the CR close to 9:1. Get a dist. from Charley NY and your troubles are over. These heads will work on an early block, just plug the right holes. But a late block is worth the effort. Gramps