Quote:
Originally Posted by Bud
Please be aware that a B flywheel housing does NOT have the same location for the starter as on an A flywheel housing. It is rotated up toward the engine. This prevents the starter pushrod from aligning with the switch. I did the later gears in a 32 case and used the B pan and B flywheel housing but never again. You need special motor mounts too. I recommend keeping the V8 gearcase and using the aluminum adaptor. Be also aware the aluminum adaptor sometimes interferes with the radius rod.
|
What problems did you have with the later gears in the B case and what problems did you have with the B flywheel housing and pan?
Charlie Stephens