The Ford Barn - View Single Post

t-head · 06-23-2010, 06:27 PM

craneygartz......Thanks for the post and the link on the wire wheels.

One more early OHC head that Murray Fahnestock discusses but I do not have any idea if it was actually produced. It seems to be a little far fetched to have been made as it required two cams to be made and it would have been very expensive. If any body has any more info on it please post it.

The original valves were retained, but I assume it would have needed a special cam to open two valves in a cylinder at a time. The cam in the head was driven by a chain like the early Craig Hunt head.

06-23-2010, 06:27 PM	#192
t-head Senior Member Join Date: Jun 2010 Location: In my machine shop. Posts: 1,047	Re: Model T Racing Thread craneygartz......Thanks for the post and the link on the wire wheels. One more early OHC head that Murray Fahnestock discusses but I do not have any idea if it was actually produced. It seems to be a little far fetched to have been made as it required two cams to be made and it would have been very expensive. If any body has any more info on it please post it. The original valves were retained, but I assume it would have needed a special cam to open two valves in a cylinder at a time. The cam in the head was driven by a chain like the early Craig Hunt head. Last edited by t-head; 06-12-2011 at 11:00 AM.