The Ford Barn - View Single Post

midgetracer · 12-13-2014, 06:23 PM

Frank,
I would use the laminated original material cam gear. They make two qualities, masserated(cheaper) and laminated. Your old gear swelled a bit from sitting so long and may be a bit stuck on the cam, but with a bit of prying, it will come off. A new one will go on easier. be sure to line up the timing marks. Congratulations on your success so far. The worst is over.

12-13-2014, 06:23 PM	#201
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,189	Re: 1933 can't start after recent restart Frank, I would use the laminated original material cam gear. They make two qualities, masserated(cheaper) and laminated. Your old gear swelled a bit from sitting so long and may be a bit stuck on the cam, but with a bit of prying, it will come off. A new one will go on easier. be sure to line up the timing marks. Congratulations on your success so far. The worst is over.