The Ford Barn - View Single Post

Tinker · 03-24-2019, 08:42 PM

I put in regular old solid bearings and then took the axle and spindles to a machine shop. (I don't have a reamer) (they were well versed in old ford). They fit the pins, it was cheap. Done and done. No issues at 70mph.

03-24-2019, 08:42 PM	#14
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: King Pins I put in regular old solid bearings and then took the axle and spindles to a machine shop. (I don't have a reamer) (they were well versed in old ford). They fit the pins, it was cheap. Done and done. No issues at 70mph. Last edited by Tinker; 03-24-2019 at 08:52 PM.