Sponsored Links (Register now to hide all advertisements)
here are the pictures from disassembly
11" clutch from Van Pelt #*81T-7550
Pilot bearing from Van pelt # 2065-16
side of clutch with the extensions faced transmission
Is the pilot bearing in far enough?
Is the clutch fork facing the right way?
Correct Bolts for flywheel?
clutch thickness is 5/16
clutch spline thickness is 1 1/8
correct pressure plate? it measures 2 7/8 from floor to face or surface
Correct clutch and or thickness? , pilot bearing? , throw out bearing?
Suggestions please......