Thread
:
Incorrect timing on pulley of 53' Mercury
View Single Post
01-19-2020, 12:52 PM
#
7
19Fordy
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,936
Re: Incorrect timing on pulley of 53' Mercury
Would it be possible to lift and rotate the distributor gear one tooth so that the hold down nut is more centered on the distributor hold down flange and the rotor is still at 6 o'clock?
19Fordy
View Public Profile
Send a private message to 19Fordy
Find More Posts by 19Fordy