The Ford Barn - View Single Post - R3 Generator

Brian · 12-26-2020, 10:18 PM

Your desired generator will put out either 6 volts or 12 volts, either polarity, depending on battery used. Simply polarise generator to suit....As Fun Projects regulators are not currently [pun] available, use a diode inside the original cutout housing, unless you can find a 12 volt cutout.
Your truck sounds COOL.

12-26-2020, 10:18 PM	#5
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,834	Re: R3 Generator - cutout, voltage ..... Your desired generator will put out either 6 volts or 12 volts, either polarity, depending on battery used. Simply polarise generator to suit....As Fun Projects regulators are not currently [pun] available, use a diode inside the original cutout housing, unless you can find a 12 volt cutout. Your truck sounds COOL. __________________ Unfortunately, two half wits don't make a whole wit!