The Ford Barn - View Single Post

Jim Brierley · 07-24-2021, 11:23 AM

Setting the drag by feel works very well. I would tighten the inner nut just enough to eliminate the slop, then install the front nut tightly and bend the tab. drag slight should be felt.

07-24-2021, 11:23 AM	#7
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,091	Re: Pre load Setting the drag by feel works very well. I would tighten the inner nut just enough to eliminate the slop, then install the front nut tightly and bend the tab. drag slight should be felt.