Re: Anti Rattler Pics
Also to it could very well be the bracket that is welded to the Rear Radius Rod Assembly (RRRA)...I was in the same prediciment and thought that the springs themselves needed to be bent...Even put a post on the barn on just how to bend them to get the correct shape...No takers!
THAT WAS NOT the problem. I started to compair the bracket angle to the RRRA on others that I have and found out that the brackets were bent so I took a happy medium on all the brackets on other RRRA's and BINGO...bent them to the right position and then there was no need to bend the springs!
Pluck
|