The Ford Barn - View Single Post - valve guide re- bush and tooling

Ronnie · 08-07-2019, 05:36 PM

Sponsored Links (Register now to hide all advertisements)

Do you have any bronze guide tooling now??

If not it is a fair investment in tools to get the minimum tooling for 11/32" valves. Boring tool for bronze. Reamers or carbide balls for correct sizing,installation tooling,removal tool,trim to length tooling after installation.Flex hone Home made tooling to hold guide while installing liners
. Regis Silver Seal Goodsen all have the tooling. I have some new never used 11/32" stuff that is surplus to me. What is your location?

https://goodson.com/blogs/goodson-ga...e-guide-liners

R

08-07-2019, 05:36 PM	#2
Ronnie Senior Member Join Date: May 2010 Location: Canada Where it snows Posts: 2,058	Re: valve guide re- bush and tooling Sponsored Links (Register now to hide all advertisements) Do you have any bronze guide tooling now?? If not it is a fair investment in tools to get the minimum tooling for 11/32" valves. Boring tool for bronze. Reamers or carbide balls for correct sizing,installation tooling,removal tool,trim to length tooling after installation.Flex hone Home made tooling to hold guide while installing liners . Regis Silver Seal Goodsen all have the tooling. I have some new never used 11/32" stuff that is surplus to me. What is your location? https://goodson.com/blogs/goodson-ga...e-guide-liners R Last edited by Ronnie; 08-07-2019 at 05:44 PM.