Quote:
Originally Posted by Pat/Ohio
I use a "momentary" toggle switch to activate my Airtex E8902 pump. Just hold the switch in the "on" position until the engine starts...then release the switch and it will automatically switch to the "off" position. Often times I hold the toggle switch in the "on" position for 5 to 10 seconds (after the car has been sitting for several months) then release the switch and then try the ignition and the car usually starts right up.
Pat
|
Quote:
Originally Posted by 51 MERC-CT
Hope your mechanical pump never goes bad  |
Could lead to a new distracted driving charge, 'Driving while toggling'
