Re: More on shifter tower gasket
When I install a transmission tower I use a sealer to attach the gasket to the tower, but none to attach the tower to the transmission. I coat that surface and the one against the bell housing with grease. The reason, if ever I need to remove the tower, I won't tear the gasket up, and if I want to replace it I can easily scrape it off or wire wheel the tower. If it is also glued to the transmission housing you will tear it up upon removal and you will have to scrape it off and chance getting bits of gasket down into the transmission.
I follow this same practice when installing the valve cover side plate.
Tom Endy
|