The Ford Barn - View Single Post

redmodelt · 08-20-2018, 07:32 PM

You are only sealing the top where the shifter tower meets the bell housing. It is there so any 600W that works its way along the shift rail travels into the bell housing instead of down the sides of the transmission case. The holes the shift rails move in and out in the bell housing are open on the inside.

08-20-2018, 07:32 PM	#3
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: More on shifter tower gasket You are only sealing the top where the shifter tower meets the bell housing. It is there so any 600W that works its way along the shift rail travels into the bell housing instead of down the sides of the transmission case. The holes the shift rails move in and out in the bell housing are open on the inside. __________________ I know the voices aren't real but damn they have some good ideas!