View Single Post
Old 08-18-2018, 01:10 PM   #7
Senior Member
denniskliesen's Avatar
Join Date: Nov 2016
Location: SoCal
Posts: 735
Default Re: Shifter tower gasket question

I don't even use a gasket up there anymore, on either surface. I clean all mating surfaces dry, and smear a little Ultra Black on put it together. Never had a leak after that.

If you ever have your transmission out, I would highly recommend installing the transmission-seal-deal, or whatever it's called up on the inside of the bell housing, made by Mitchell.
denniskliesen is offline   Reply With Quote