The Ford Barn - View Single Post - Help! 32 Cab: Mounting rumble lid cushion to deck lid

TJ · 06-03-2018, 02:44 PM

On the bottom there should be "D" nuts that are pressed into the inner panel. They would have a 12-24 or 1/4-20 thread. The screws go through the tabs and screw into the D nuts. If you don't have the D nuts you can drill some holes in the inner panel and install threadserts for the screws

06-03-2018, 02:44 PM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,055	Re: Help! 32 Cab: Mounting rumble lid cushion to deck lid On the bottom there should be "D" nuts that are pressed into the inner panel. They would have a 12-24 or 1/4-20 thread. The screws go through the tabs and screw into the D nuts. If you don't have the D nuts you can drill some holes in the inner panel and install threadserts for the screws