Re: Copper head gasket or best Kevlar?
Quote:
Originally Posted by P.S.
I recently installed a Best brand kevlar (they call it graphite) head gasket on a Model A. I followed all directions exactly. No water seepage, however when pulling a hill in 3rd gear at 45 MPH or so, the combustion gasses are getting into coolant and blowing the water out the radiator overflow.
Yes, I have re-torqued it (read above where I followed ALL directions). The block/head are flat.
Going back to copper gaskets. No problem with those.
|
Kinda what I wanted to hear or didn't want to hear. Copper sprayed with Ultra Copper? I only want to do this once.
__________________
"Never complain,never explain"... Henry Ford II
|