View Single Post
Old 09-13-2019, 10:09 AM   #19
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,042
Default Re: Newbie '29 Speedster project, the good the bad and even the ugly (maybe)

Quote:
as well as new rear axle castle nuts and seals
Don't forget the hardened flat washers that go between the castle nut and the hub. FWIW, the washers I got from Bratton's were too soft, I ended up getting proper hardened washers from the local friendly "Cat" dealer.
BTW, you can patch up that steering wheel w/bondo, then a coat or 2 of black enamel.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote