View Single Post
Old 11-28-2011, 12:48 AM   #84
Mike V. Florida
Senior Member
 
Mike V. Florida's Avatar
 
Join Date: May 2010
Location: South Florida
Posts: 14,054
Send a message via AIM to Mike V. Florida
Default Re: At my wits end, with this no-start problem!

After 4 months and 5 pages here it's time to go back to ground Zero and back to basics. FORGET everything you have done so far and start from the beginning.

You need,
Fuel
air
compression
spark
all at the right time.

I would start with spark, since you changed out to a pointless system the testing is a little harder. Get a list of trouble shooting tips from FS ignition. No matter what else might be wrong you need a strong blue spark or your wasting your time looking at other things. Your original post stated that you have a weak spark. Work on this first. Check grounds, all connections between frame, body and engine. Check all connections period in all the ign wiring!

Once you have a strong spark get back to us.

http://www.fsignitions.com/uploads/T...ide_9-7-10.pdf

I'm serious, you need to start with ONE thing get it right and move on.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
Mike V. Florida is offline   Reply With Quote