View Single Post
Old 04-23-2016, 02:58 PM   #8
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Test Stand Start Up Questions/Problems 8BA SOLVED!!!

Quote:
Originally Posted by southfork View Post
This is hard for me to follow. Why are pictures of 4 hand-drawn wiring diagrams included? Are they different?(they are not very legible) If so, which is correct, if any. Just trying to understand the wiring problem and the solution.
The original post was made because the engine starter would not operate.
Then after finding the solution the Original poster altered the original post to reflect that solution rather than make a new post to reflect finding the solution.
So it looks like a solution was found for some mysterious problem that may or may not be connected to the radiator that's been re-cored and filled with 50-50 distilled water and antifreeze. Or maybe a modified GM distributor with new coil and resistor. Confusing? it sure is.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote