The Ford Barn - View Single Post - STREET MACHInES, Engines, gearing and etc

Ole Don · 09-04-2019, 10:30 AM

FYI, a pre 1990 Ranger rear axle from a 4x4 should be a factory Traction Loc that is 56 5/8 from mounting flange to mounting flange. It should be a 3.73 or 4.10. The four cylinder ratio may be 3.45, same width but with small brakes.

09-04-2019, 10:30 AM	#37
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: STREET MACHInES, Engines, gearing and etc FYI, a pre 1990 Ranger rear axle from a 4x4 should be a factory Traction Loc that is 56 5/8 from mounting flange to mounting flange. It should be a 3.73 or 4.10. The four cylinder ratio may be 3.45, same width but with small brakes.