The Ford Barn - View Single Post

vetpenny · 09-24-2021, 09:14 AM

Thanks for your quick reply. The diameter of the hole in my floor pan is 2.75 inches which according to my correspondence with a technical staff person (Lee) at C&G antique ford parts should be 3 inches. Do you remember where you got your floor pan or was it the original floor pan that came with the truck. Also, if your floor pan was a reproduction of the original did it come with 3 inch diameter hole or did you have to cut it out. Thanks for your help.

09-24-2021, 09:14 AM	#7
vetpenny Senior Member Join Date: Oct 2014 Posts: 103	Re: 1940 ford pickup metal floor board Thanks for your quick reply. The diameter of the hole in my floor pan is 2.75 inches which according to my correspondence with a technical staff person (Lee) at C&G antique ford parts should be 3 inches. Do you remember where you got your floor pan or was it the original floor pan that came with the truck. Also, if your floor pan was a reproduction of the original did it come with 3 inch diameter hole or did you have to cut it out. Thanks for your help.