Re: Frozen Shocks
You can not expect shocks to function properly by just adding some oil and letting soak. That would be the rare exception. There are some small check ball passages that need to be cleared and other inspections that need to be done.
Degrease them then put them in an electrolytic rust removal tank (google it).
You are not likely to get them to move easy and will not get them functioning properly without a full tear down, cleaning and (if good) reassembly. Function is based on how tight the shaft is and if there are significant pitting in the chamber.
Take apart needs some big tools. There are a number of methods. I will not go into take apart as I need to work on techniques and I do not know how to properly advise you.
|