View Single Post
Old 08-24-2019, 11:17 PM   #9
my4dv8
Senior Member
 
Join Date: Aug 2010
Location: New Zealand
Posts: 1,110
Default Re: Oil Leaking from fan hub

Ok took it off today. Man that circlip is small . Now do we need a press to
Get the shaft hub and sealed bearings apart? So the circlip holds the bearing in, what holds the shaft in the bearings?
I think we dodged a bullet , cleaned the hub up around the rivets , Lo and behold each rivet had a decent crack radiating out. Plan is to clean out cracks with a die grinder and tig weld them back up.

Last edited by my4dv8; 08-25-2019 at 02:09 AM.
my4dv8 is offline   Reply With Quote