The Ford Barn - View Single Post

Ole Don · 12-16-2011, 03:28 PM

Remove the lower A arms. Drill out the rivets holding the spring buckets in. make up 1 1/2 square tube spacers, bolt it together with good quality bolts. The spring stays the same, the ride and handleing stay the same, the car sits two inches lower. It can be reversed if the next guys wants it that way.

12-16-2011, 03:28 PM	#2
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: Lowering 1955 Ford CV Remove the lower A arms. Drill out the rivets holding the spring buckets in. make up 1 1/2 square tube spacers, bolt it together with good quality bolts. The spring stays the same, the ride and handleing stay the same, the car sits two inches lower. It can be reversed if the next guys wants it that way.