View Single Post
Old 05-24-2018, 04:47 PM   #4
Senior Member
Hoop's Avatar
Join Date: May 2010
Location: Jacksonville FL
Posts: 1,137
Default Re: Trans identification (year)

Always be aware of what gear ratios are in the transmission and the rearend.

How many teeth are on the Main Drive Gear ... the small top gear at the front of the transmission on the input shaft. And, what is the rearend ratio?

Knowing this ahead of time will help in your decisions.
"Remember that when it comes to intelligence, half of all of us are below average."
Hoop is offline   Reply With Quote