Thread: Spark Advance and Throttle Levers very tight.
View Single Post
Old 09-04-2014, 11:01 AM   #5
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Spark Advance and Throttle Levers very tight.
Sponsored Links (Register now to hide all advertisements)
The forged arm on the bottom of the rod is pinned in place. You need to locat the pin and grind off the end, then drive the pin out.
Tom Wesenberg is offline   Reply With Quote