The Ford Barn - View Single Post

Brentwood Bob · 11-08-2018, 04:02 PM

Chisel off and drill out to remove rivets. I found rivets at a farm implement/equipment dealer and big flats rivet company sells rivets and gives instructions on correct install. Prime the lap before riveting.

11-08-2018, 04:02 PM	#32
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,240	Re: Front cross member needed badly Chisel off and drill out to remove rivets. I found rivets at a farm implement/equipment dealer and big flats rivet company sells rivets and gives instructions on correct install. Prime the lap before riveting.