Quote:
Originally Posted by Kohnke Rebabbitting
9:00, and 3:00 should read alike.
12:00 and 6:00 should read a like.
All 4 points have to be a like.
This is all accomplished, with shims on the two top bolt holes.
Set 9 & 3 first, and 12 & 6 next.
Shim amounts on both sides will likely, not be the same, but all for points will be square, and that is what your after.
You also should be using shim thickness, as littled as .001, to .002 thousandths.
Herm.
|
Understand how the shims affect 1200/0600 tolerance, not sure how 0900/0300 is adjusted. Thinking the shims are only placed on the upper through bolts and not the side bolts. Welcome clarification since I expect to do this drill when the cooler weather makes it to Florida.