The Ford Barn - View Single Post

cas3 · 11-13-2019, 10:06 PM

i would just look for the best bearing surface, and a good diameter would be the ones that measure to be round, or as close to it as possible. they wear on the bottom, and thats pretty forgiving so long as the bearing surface is nice

11-13-2019, 10:06 PM	#2
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,578	Re: 35 axle housing i would just look for the best bearing surface, and a good diameter would be the ones that measure to be round, or as close to it as possible. they wear on the bottom, and thats pretty forgiving so long as the bearing surface is nice