The Ford Barn - View Single Post

1930artdeco · 04-09-2018, 10:13 AM

I just had my Rad cleaned out and am soaking the block in Evapocool. Here is what I am thinking about:

Reassemble and fill up the system with a Nylon sock in the upper hose to catch any large loose chunks. Then replace it with one of the GANO filters to catch smaller items. Sound reasonable or should I just put a GANO Filter in and monitor? The picture I saw had some pretty large chunks in the upper tank.

Mike

04-09-2018, 10:13 AM	#1
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,552	opinion on Rad filters I just had my Rad cleaned out and am soaking the block in Evapocool. Here is what I am thinking about: Reassemble and fill up the system with a Nylon sock in the upper hose to catch any large loose chunks. Then replace it with one of the GANO filters to catch smaller items. Sound reasonable or should I just put a GANO Filter in and monitor? The picture I saw had some pretty large chunks in the upper tank. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan