Re: Gas gauge gasket disintegrated
Quote:
Originally Posted by Y-Blockhead
McMaster Carr. The gasket in the picture for a Marvel carburetor is 1/32" thick. They have all sizes available.
Fel-Pro has Cork/BUTA-N or Cork Nitrile sheets also.
I cut my own gaskets
|
Thank you! As I suspected you cur your own gaskets! A lost art making your own gaskets, an old timer showed me his way of making gaskets tapping the stock on the part with a ball peen hammer!
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
|