View Single Post
Old 06-17-2020, 02:26 PM   #8
miker98038
Senior Member
 
miker98038's Avatar
 
Join Date: Mar 2013
Location: Kent, WA. Tucson, AZ
Posts: 1,398
Default Re: Rebuild a 4412 holley custom

I'm far from an expert, but I've had 2 Edelbrock AFB style and one Holley 1850 style tuned to run as blow thru carbs at fairly low boost levels, 5-7 psi in the manifold. We had to look to the secondaries for the enrichment under boost. The primaries took some tuning but for a street car they were too rich with boost, so we ended up really rich on the secondaries. Particularly with the Edelbrocks they always went a bit rich on the top end in order to be ok in the mid range. You might want to contact someone with real experience to see how that plays out on a 2 barrel.
miker98038 is offline   Reply With Quote