The Ford Barn - View Single Post - Cam Timing question for the experts on Isky 1007B

Ronnie · 03-22-2012, 07:44 PM

Are you checking with the valves in and assembled?

The specs are taken from a lifter with no valve installed.You are out because the lash has to be taken up before you get valve movement. Do it without valve direct from lifter.

03-22-2012, 07:44 PM	#2
Ronnie Senior Member Join Date: May 2010 Location: Canada Where it snows Posts: 2,058	Re: Cam Timing question for the experts on Isky 1007B Are you checking with the valves in and assembled? The specs are taken from a lifter with no valve installed.You are out because the lash has to be taken up before you get valve movement. Do it without valve direct from lifter.