Thread
:
unusually headlight issue
View Single Post
02-13-2018, 01:04 AM
#
18
Tom Wesenberg
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Re: unusually headlight issue
The filament being above the centerline reflects off the silvered reflector at a downward angle, so this is low beam.
The lower filament will bounce off the reflector at a higher angle, so this is high beam.
Tom Wesenberg
View Public Profile
Send a private message to Tom Wesenberg
Find More Posts by Tom Wesenberg