[Ken/Alabama]

Originally Posted by Vic Piano

Grease Question

When we rebuilt the LZ’s transmission, I installed an NOS U joint and new gaskets. I packed the U joint with Corn Head grease and, after assembly I pumped more grease into the housing. Everything is working well except that after driving the car and letting it sit overnight, I’m finding little Corn Head “gifts” on the garage floor. I’ve driven the LZ about 500 miles and the other day, after finding more grease on the floor; I pumped almost a full tube of Corn Head grease into the housing. This grease is “low Temp” so that it lubricates the U joint instead of just coating the interior of the housing through centrifugal force. I have not been able to identify the area that the grease is leaking from and I’m wondering if packing the U joint will just become another part of normal maintenance only on a more frequent basis… Have any of you had a similar experience using Corn Head Grease

Hey Vic, Is your nos u-joint one of the Lincoln joints with needle bearings or a Ford joint ? Im considering putting a Ford joint in my Zephyr,every Lincoln joint I have seen is worn out . Seems to me there would have to be some thin grease in there to work its way into one of those Lincoln joints. Anyone else have any thoughts on this ?