The Ford Barn - View Single Post

'29wagon · 12-14-2011, 01:16 PM

i've got a '29 a, with the button, rod, pawl, spring and pin missing. and i have a '31 aa, e brake complete.
i see the length is different as well as the pivot, i have not removed any internals from the '31 and don't plan to.
i can not tell for sure if the later will drop into where the earlier was on the transmission tower.
pivoting may be an issue and length may cause it to hit the dash. what else ?
thanks.

12-14-2011, 01:16 PM	#1
'29wagon Senior Member Join Date: May 2010 Location: H.B. California Posts: 451	are e brake handles interchangeable ? i've got a '29 a, with the button, rod, pawl, spring and pin missing. and i have a '31 aa, e brake complete. i see the length is different as well as the pivot, i have not removed any internals from the '31 and don't plan to. i can not tell for sure if the later will drop into where the earlier was on the transmission tower. pivoting may be an issue and length may cause it to hit the dash. what else ? thanks.