View Single Post
Old 05-04-2020, 11:24 AM   #6
The Master Cylinder
Senior Member
 
The Master Cylinder's Avatar
 
Join Date: Aug 2012
Posts: 617
Default Re: Front engine mount

Sponsored Links (Register now to hide all advertisements)
This from Bratton's catalog "The brass washer was used from Nov. '28 thru Jan. '29 then it was replaced with a steel flat washer. It is believed the brass shouldered washer restricted the yoke stud from moving side-to-side when one wheel went into a pothole, thus putting too much stress on the stud."
__________________
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote