The Ford Barn - View Single Post

redmodelt · 05-15-2018, 07:12 PM

I pulled a Zenith apart and filled the bowl up to just below coming out the jet with mineral spirits. While the fluid did creep up the sides to the inside top edge, after 2 plus hours it had not gone over the top and down the sides. I would have tried gas but didn't have any handy.

05-15-2018, 07:12 PM	#14
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Model A Zenith Carburetor I pulled a Zenith apart and filled the bowl up to just below coming out the jet with mineral spirits. While the fluid did creep up the sides to the inside top edge, after 2 plus hours it had not gone over the top and down the sides. I would have tried gas but didn't have any handy. __________________ I know the voices aren't real but damn they have some good ideas!