The Ford Barn - View Single Post

Tom Wesenberg · 05-02-2018, 08:13 AM

I would clean out the grease, buy a new wire harness from Sacramento Vintage Ford, and solder the new wires to the parts you have. Put a light coat of lube on the switch plate when you reassemble it.

Use thick oil in the steering box, not grease.

05-02-2018, 08:13 AM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Light switch connector questions... I would clean out the grease, buy a new wire harness from Sacramento Vintage Ford, and solder the new wires to the parts you have. Put a light coat of lube on the switch plate when you reassemble it. Use thick oil in the steering box, not grease.